Steps for Using Wiikey

What is Wiikey?

Wiikey is a brand of a modification chip used for Nintendo Wiis. It enhances the functionality of your gaming console in many ways. Most gamers play their favorite games over and over again, causing the CDs to obtain scratches that eventually disable their use. By installing a Wiikey to your Nintendo Wii, you can start ripping and burning games on your own. This will allow you to produce backup copies of your favorite games. If you have just installed your Wiikey here is a quick guide to show you how to rip and burn games with it.

How to use Wiikey?

1.Install your Wiikey by removing the screws of your Nintendo Wii case with your screwdriver. Open the case to expose the console's motherboard.

2 .Apply solder to its solder pads at the back of your Wiikey, and position it over the top left side of your motherboard.

3 .Touch your soldering iron to each of the soldering pads to connect your Wiikey to the motherboard. Plug in your Gecko adapter as well as the SD card into the memory card slot of your Wii. This will then prompt you to load the game disc.

4 .Load whatever game disc you wish to rip or copy with your Wiikey. The Wiikey will then save the files on your SD card, but the card may be too small to fit the entire game. Remove your SD card and transfer its files to your computer once the Wiikey has dumped all the data the card can hold. Use your card reader to connect the SD card to your PC and transfer the files.

5 .Delete the contents of the SD card after copying it to your PC and insert it back into the memory card slot. Continue to copy the game's data. You may need to do this for up to three times depending on the size of your SD card.

6 .Combine the files into one folder on your PC and burn it using your computer's burning software program. Use a 4.7 GB DVD for burning and play it on your Wii as soon as it is done.

If  you have any problems following the guide or require any help, please feel free to Contact Us.

By Wasbi360s

How to Test Wode Wii？

These are some tips about how to test your wode wii

1. Put your Wii drive back on .
2. Screw down those 4 screws that hold te DVD drive in place.
3. Connect the WODE to the back of the WII (usb power) .
4.  Turn your wii on from here, and test to see if the WODE powers up .
5. Plug in your HDD, and test a game out. If it works, its time to close the wii!

Above is the methods to test wode wii,hope this article can help you more or less.
If you heve any good advice,please feel free to let us know.


By Wasabi360s

What is the Difference between X360USB PRO and X360key

X360USB PRO & X360 KEY are two popular xbox 360 accessories for xbox,and they are hot sale now,What is the difference between x360 USB Pro and X360 Key? Mabey you  will confuse on them when you choose.Hope this article can help you.

X360key

1, X360 key ,one of the founders and maindeveloper of the WODE (wii optical drive emulator) Modchip quit his work on the WODE Project last year to be a part of the legendary Wiikey team and create a new project called x360key, an Xbox 360 drive emulator which allows you to load legal backups from an usb device
2,X360 Key is Compatible with all Xbox 360 model,it is the world's first xbox 360 jailbreak item which was released by x360key official team.
3,X360Key can support most Xbox 360 and Xbox games now ,and it can support most file systems, including NTFS, EXT2/3/4, and Mac OS X Extended, it also can be regarded as Stylish USB control pad for selecting games and controlling your xbox 360 jailbreak. The shining point of the X360 jailbreak is that it has User friendly: intuitive interface, no soldering required and more it is compatible with all fat (and soon slim!)Xbox 360 models.

X360USB PRO

1,Xecuter's X360USB PRO is the world's first SATA to USB Mass-Storage controller that not only enables WINAPI over USB, but also PORTIO. This powerful all-in-one converter can be used with any software or hardware that uses these signals to work. buy x360 usb pro from gamezway.com.Designed by Team Xecuter in conjunction with the experts at Team Jungle, the X360 USB PRO adapter is the most advanced WINAPI/PORTIO to USB adapter ever created.
2,The Xecuter X360USB PRO is not a jailbreak item abd it is only Compatible with parts consoles,such as Xbox 360 DVD drives Hitachi, Samsung.
3,X360USB PRO is the most advanced WINAPI/PORTIO to USB adapter ever created. It can be compatible with Xbox 360 DVD drives Hitachi, Samsung, Benq; Liteon (FAT) and Liteon; Hitachi (SLIM).

What is Modbo 5.0

MODBO 5.0 is an new generation of PS2 MOD chip that integrates a USB boot menu so you can play games from usb hard drive or usb memory stick! start the console without any CD/DVD.

Even better, the install is exactly the same as the Modbo 4.0, so if you want to upgrade, you can just replace the modchip without needing to solder all the connections to the ps2 motherboard again.

You can also easily disable the usb boot option and use the modbo 5.0 in the same way as you have always used your modbo 4.0.

Features:


* USB HARD DRIVE and Memory Stick Support!
* Fully compatible with ps2 v1-v16 PAL / USA / Jap
* Upgraded from modbo3.0, comes with original 100% v1.88 firmware, but it isn't upgradeable
* Comes with mini size board and the wiring point order is good for installation
* Automatic selection for PS2/PS1/DVD supports
* DVD region free incorporated
* Software selectable "PS2 Quick Load" option. (to skip PS2 logo and Quick boot PS2 games)
* Software selectable "PSX Quick Load" option (to skip PS1 logo and Quick boot PSX games)
* Easy to install (only 18 wires for V1-V8 and 20 wires for V9, V10, V11, V12, V13)
* CPLD chip (3.3V power supply) based IC for enhanced stability
* Automatic "MACROVISION=OFF" on all PS2 from V3 to V16 without additional wires
* Automatic "green fix" (no more need to change the cable to see your DVD movies on the PS2)
* Imports games fix (all PSX import games are played at full screen and full color
* Stealth-mode (the modchip can be switched off and becomes invisible to online gaming)
* Sleep-mode (the modchip will switch off itself after boot)
* Supports DVD-9 games
* Plays all CD's and DVD's games (both, import or backup's)
* Supports multi-disk games
* Supports anti-mod PS1 games (only for V9 - V16 PS2)
* Very reliable (all the Modchips are 100% tested before delivery)
* Very stable (thanks to sleep mode the IC will never overheat)
* CD lens safe (avoid CD lens damage by sending un-necessary signal to drive controller)
* Supports DEV1 and DEV2 for memory card booting

Wasabi X360S Xbox 360 Slim HDD Loader Features

The ultimate ODDE (Optical Disc Drive Emulator), allows you to emulate your 360′s optical disc drive and run Xbox 360 or Xbox 1 ISO’s from HDD. No more hunting for game discs, simply execute your favourite ISO’s from any ESATA HDD. Easy, fast, safe and convenient.

• Solderless installation
• Selection of your favourite ISO’s via our intuitive user interface
• Support for AP25 enabled ISO’s
• ESATA interface is used in place of USB providing superior performance, since data is transferred directly between the ESATA HDD and Xbox 360 resulting in impressively high bandwidth, many times faster than reading from a real DVD disc
• Elegant and streamlined console inspired case design
• Versions available for both fat and slim consoles
• NTFS file system natively supported
• Powerful embedded CPU running performance tuned Real Time Operating System
• Regular firmware updates available free for download
• Fully updatable hardware (MCU and FPGA’s) from ESATA HDD including a failsafe recovery mode
• No need to modify your original ODD

Features coming soon:

• Xbox Live compatibility
• Dumping of X360 ISO’s from original discs

How to use x360key xbox360key

How to use xbox360 key

x360key is also called xbox360key consists of 2 parts, a motherboard and a remote.
The motherboard connects to the SATA bus inside the Xbox 360, and sits between the drive and the Xbox 360 motherboard. x360key is a full-fledged computer system running embedded Linux. It is capable of many things such as
- Emulating the Xbox 360 DVD drive
- Reading USB hard drives and other USB media with various file systems
- Updating itself and other hardware from USB media
- Communicating with the remote and other external USB devices
- And a lot more! (embedded Web server and Wifi connectivity for example)
The remote is a simple yet stylish piece of hardware that features an OLED display and 3 buttons. It connects to the x360key motherboard via a high speed USB2 connection. It also has USB for connecting USB hard drives and other devices. The OLED and buttons are used to control various aspects of x360key. It is also used for browsing attached USB media devices and launching games